Hanna Instruments HI 2214 Instruction Manual

21LOGGING FUNCTIONUp to 600 logged samples can be stored into memory.100 manually logged records and 500 lot logging records can be storedin the memory. To select logging type, enter SETUP menu.LOGGING THE CURRENT DATA (manual logging)Select the manual logging mode in SETUP menu.To store the current reading into memory, press LOG while the instrumentis in measurement mode.The instrument will display:HI 2214 - the current date (mm.dd) on the primary LCD, the recordnumber on the secondary LCD and “LOG” tag will blink for a few seconds(see example below: record No. 15 dated September 14):HI 2215 - “MAn” on the primary LCD, the record number on the secondaryLCD and “LOG” tag for a few seconds (see example below: record No. 15):followed by the number of free records:If there are less than 6 memory locations remaining, the record numberand “Lo” message will be displayed to alert the user.If the log space is full (100 records), “FULL LOG” message will bedisplayed and no more data will be saved.When LOG is pressed, a complete set of information is stored: date, time,pH, mV, temperature and calibration data.28CURRENT TIMEPress CAL when the current time is displayed. The hour and “CFM” willstart blinking.Press the ARROW keys to change the hour.Press RANGE. The minutes and “CFM” will start blinking.Press the ARROW keys to change the minutes.Press CFM to save the modified value.Press CAL to escape without saving.CURRENT DATEPress CAL when the current date is displayed. The year and “CFM” willstart blinking.Press the ARROW keys to change the year.Press RANGE. The month and “CFM” will start blinking.Press the ARROW keys to change the month.Press RANGE. The day and “CFM” will start blinking.Press the ARROW keys to change the day.Press CFM to save the modified value.Press CAL to escape without saving.BEEP STATUSPress CAL when the beep status is displayed. Beep status (“On“ or“OFF“) and “CFM” will start blinking.

/ 24

Related manuals for Hanna Instruments HI 2214