Hanseatic HWM 614 A3IT User Manual

Hanseatic HWM 614 A3IT User Manual Manual pdf 59 page image

Standard cycles Page GB-19Suspending the cycleOffEco 20°CEasy careWoolRinseAllergySpinHand-/delicate washSportsMixedShirtsCottonCottonCottonShort 60'Extra short 15'StartPauseStart timepreselectionSpinTemp.60°CFunctions40°C°C°Anti-creaseSignal00000(2)1. To suspend a running cycle, turn the cycleselector (2) to the ‘Off’ position.The wash cycle will stop and the laundrywill remain in the suds/rinse water.2. To pump the water, please refer to the nextsteps.Pumping water1. Turn the cycle selector to the ‘Off’ position.2. Turn the cycle selector to any cycle.The water is now pumped.3. You can now switch off the appliance orstart any cycle.Cycle endThe appliance stops automatically as soon asthe selected cycle is finished.1. If the ‘End’ signal appears on the display,you can open the loading door and take outthe laundry.2. Open the loading door and remove thelaundry from the drum.3. Leave the loading door open and pull thedispensing drawer out slightly so that theappliance can dry off inside.4. Turn the cycle selector (2) back to the ‘Off’position to switch off the appliance.5. Disconnect the mains plug (8) from thesocket.6. Close the valve.