Hanwha Techwin WiseNet HCB-6001 User Manual

Contents

24_ camera operationcamera operationy MANuAL : Select this to fine-tune WhiteBalance manually. Set WhiteBalance first by using the ATWor AWC mode. After that buttonto MANUAL mode, fine-tune theWhite Balance and the FunctionSetup switch.y AwCSET : To find the optimal luminance level for the current environment, point the cameratowards a sheet of white paper and press the Function Setup switch. If the environ-ment changes, readjust it.M ` White Balance may not work properly under the following conditions. In this caseselect the AWC mode.1 Select this When the color temperature of environment surrounding the subjectis out of the control range (e.g. clear sky, or sunset)2 When the ambient illumination of the subject is dim.` If the camera is directed towards a fluorescent light or is installed in a place whereillumination changes dramatically, the White Balance operation may becomeunstable.EXPOSuRE1. When the SETUP menu screen is displayed, select ‘EXPOSURE’ by using theFunction Setup switch so that the arrow indicates ‘EXPOSURE’.2. Select a desired mode using theFunction Setup switch.y BRIGHTNESS : Adjusts the videobrightness.y LENS : Using this function, you cancontrol the screen brightness.- DC : Select Auto Iris Lens.y IRIS SPEED (DC) : Adjusts the Iris control speed of the DC lens. If the controlspeed is too slow or fast, please use this menu to adjust thespeed.y FOCUS ADJ (DC) : To correctly adjust the focus of LENS, activate the focus setupmode located at the bottom of each lens menu.- Manual : The shutter does not automatically move but is fixed to the maximaldegree in this mode.wB MANuAL 1. RED GAIN IIIIIIIIIIIIIIIIIIIII 1472. BLuE GAIN IIIIIIIIIIIIIIIIIIIII 1243. RETuRNEXPOSuRE SETuP 1. BRIGHTNESS IIIIIIIIIIIIIIIIIIIII 502. LENS DC3. SHuTTER4. AGC HIGH5. SSNR4 ON6. RETuRN