Hanwha Techwin WiseNet HCB-6001 User Manual

Contents

English_29Camera OperatiOn- RET PKT : Determines whether to send a command back to the controller devicewhen a communication control command is sent to the camera.- COAX : You can select whether to use COAX communication.- RETURN : Return to the SPECIAL menu.y IMAGE ADJ❶MMIf the SPECIAL menu screen isdisplayed, use the Function Setupswitch so that the arrow indicates‘IMAGE ADJ’.❷MMSelect a desired mode using theFunction Setup switch.- GAMMA : The setting range is 0.35 ~ 1.0.The closer to 1.0 the setting is,the darker it gets.- PED LEVEL : The setting range is 1 ~ 100. The closer to 100 the setting is, thehigher the PED level gets.- COLOR GAIN : The setting range is 1 ~ 100. The smaller the setting value is thesmaller the color gain gets and the more color blind it gets.- H-REV : Flip an image horizontally.- V-REV : Flip an image vertically.- SHARPNESS : Select a mode to adjust the thickness of an image’s sharpness.Increase or decrease the level of each mode to adjust the level of sharpness.y OFF : Released statey ON : The setting range is 1 ~ 32.- RETURN : Return to the SPECIAL menu.M ` When the V-REV or H-REV mode is enabled, the text on the screen does not flip.` If you increase the SHARPNESS level too high, the picture may becomedistorted or noise may appear.y DAY/NIGHT: You can display pictures in color or in black and white.➊ If the SPECIAL menu screen is displayed, use the Function Setup switch so thatthe arrow indicates ‘DAY/NIGHT’.➋ Select a desired mode using the Function Setup switch according to the picturedisplay you want.IMAGE SETuP▶ 1. GAMMA uSER2. PED LEvEL IIIIIIIIIIIIIIIIIIIII 53. COLOR GAIN IIIIIIIIIIIIIIIIIIIII504. H-REv OFF5. v-REv OFF6. SHARPNESS ON7. RETuRN