Harbor Breeze 40956 Installation Manual

Contents

Harbor Breeze 40956 Installation Manual Manual pdf 15 page image

15FINAL INSTALLATION7. Remove the preassembled finial (L), finial cap (K), hexnut (T) and rubber washer (U) from the light kit (J). Liftthe glass bowl (N) onto the threaded rod at the bottomof the light kit (J).Feed the pull chain coming from the grommet in thelight kit (J) through the off-center hole in the glass bowl(N). Feed the pull chain coming from the center of thelight kit (J) through the center hole in the glass bowl (N).Secure glass bowl (N) with rubber washer (U) and hexnut (T). Then attach finial cap (K) and finial (L).Proceed to Step 10.8. To install the fan without the light kit (J), removethe preassembled hex nut and lock washer from thethreaded rod on the inside of the switch housing (I).Remove light kit (J) from the switch housing (I) anddiscard, then install the plug button (EE) into the centerhole of the switch housing (I).Hardware UsedEE Plug Button x 19. Remove the three switch housing screws (X) from thefitter plate (H). Then, attach the switch housing (I) to thefitter plate (H) using the switch housing screws (X).8IEEIJUNJTKL7IXH9Hex NutLock Washer