Harbor Breeze LAKE PLACIDO CPK1261 Installation Manual

Contents

Harbor Breeze LAKE PLACIDO CPK1261 Installation Manual Manual pdf 16 page image

1. Set screws are loose. 1. Tighten all set screws.2. Using non-approved speed control. 2. Some fan motors are sensitive to signals from solid-state varible speed controls. DO NOT USE a solid-statevariable speed control.3. Normal noise. 3. Allow "break-in" period of 24 hours. Most noisesassociated with a new fan will disappear after thisperiod.4. Wire connectors inside switchhousing rattling.4. Check to make sure wire connectors in switchhousing are not rattling against each other or againstthe interior wall of the switch housing.5. Cracked blade. 5. Replace blades.6. The distance from canopy to ceilingis too great.6. Make sure upper canopy is a short distance fromceiling. It should not touch the ceiling.7. Faulty light bulb installation. 7. Make sure light bulb is tight in socket and does nottouch on glass shade.8. Glass is not secure. 8. Secure the glass.1. Hanger bracket and/or ceiling outletbox is not securely fastened.1. Tighten the hanger bracket screws to the outlet box,and/or secure outlet box.2. Set screw in downrod assembly isloose.2. Tighten the set screw in the downrod assembly.seated in canopy tabs.3. Fan hanger ball is not properly 3. Turn power off, support the fan very carefully, andcheck that the hanger ball is properly seated.4. Set screw in motor coupling is loose. 4. Raise motor coupling up and tighten set screwssecurely.5. Blade is loose. 5. Check that all blades are screwed firmly into bladeholders.Fan sounds noisyFan wobbles16Lowes.com/harborbreezeCARE AND MAINTENANCETROUBLESHOOTINGImportant: Shut off main power supply before beginning any maintenance. Do not use water or adamp cloth to clean the ceiling fan.. At least twice each year, tighten all screws and lower canopy to check mounting plate screws.. Clean fan housing with only a soft brush or lint-free cloth to avoid scratching the finish. Clean bladeswith a lint-free cloth. You may occasionally apply a light coat of furniture polish to wood blades foradded protection.. Bulb replacemnt: Use three (3) 40-watt max. type-B10 incandescent bulbs. CFL bulbs are notrecommended for this item.PROBABLE CAUSE CORRECTIVE ACTIONPROBLEM

/ 19

Related manuals for Harbor Breeze LAKE PLACIDO CPK1261