Harbor Breeze LAKE PLACIDO CPK1261 Installation Manual

Contents

Harbor Breeze LAKE PLACIDO CPK1261 Installation Manual Manual pdf 7 page image

7Lowes.com/harborbreezeINITIAL INSTRUCTIONS3. Check existing outlet box (not included) to ensure it issecurely fastened to at least two points in a structuralceiling member and can support the full weight of thefan. Once verified, install mounting bracket (A) to theoutlet box using the screws and washers provided withthe outlet box.4. Remove the hairpin clip (S) and clevis pin (R) from thecoupling (P) preassembled on motor housing (F). Retainfor later use.Note: Make sure to keep loose hardware separate toavoid confusion during installation.Loosen the two coupling screws (T) preassembled incoupling (P), but do not remove them.Note: If using the angle mount, make sure open end ofmounting bracket (A) is installed facing the higher pointof the ceiling.STANDARD/ANGLE-MOUNTING INSTRUCTIONS1. Place downrod assembly (B) through canopy (C), canopycover (D) and coupling cover (E).DECB1DANGER: A loose outlet box can cause the fan towobble and increase the fan's potential to fall, whichcould result in serious injury or death.3Open EndAA4RSTPFFor STANDARD/ANGLE-MOUNTING INSTRUCTIONS,proceed to Step 1 below. For FLUSHMOUNTINSTRUCTIONS, skip to page 9.