333 - DescriptionPneumatic spray systemThe high air speed in the spout breaks the spray liquid and gives a veryfi ne mist together with turbulence. Using the defl ectors at the spoutoutlet permits the mist to be distributed uniformly.There are four spout models, which can be combined according to thebar type and assembly requested for the machine:A. Cannon with 1 atomizerB. Spout with 2 atomizersC. Spout with 3 atomizersD. Spout with 4 atomizersThe Parafl ow pneumatic system is low pressure. This system takes advantage of the high air speed at the pipe outlet tobreak the spray liquid and give a very fi ne mist together with turbulence. Using the defl ectors at the tube outlet meansthat the liquid is distributed uniformly.There are two Parafl ow models, which cannot be used together,according to the bar type and assembly requested for the machinery:Parafl ow tube with 4 in-line atomizersParafl ow tube with 6 in-line atomizersATTENTION! Ceramic nozzles are used for the standard pneumaticsystem and the parafl ow system. This type of nozzle has twopositions. If the nozzle is fi tted so that the fl ow enters on the fl atside, less flow will be allowed than on the conical side.Hydropneumatic spray systemThe hydropneumatic system is medium-high pressure. This system takesadvantage of higher turbulence in the low-volume conical nozzle andsprays the liquid with an even distribution. The air reaches high speed inthe spout, spraying the liquid in a fan.There are three spout models with three or fi ve nozzles. These twomodels cannot be combined.E. Spout with 3 nozzles.F. Spout with 5 nozzles.Where not all the nozzles are required in treating the crop, the nozzlescan be replaced for caps.ACBDEF
