Harman Kardon 660 Owner's Manual

Harman Kardon 660 Owner's Manual Manual pdf 16 page image

16CONNECTIONSDigital audioThe AVR 760/AVR 660 is equipped with four HDMI (High-DefinitionMultimedia Interface) inputs, and one output. HDMI technology enablesdigital audio and video information to be carried using a single cable,delivering the highest quality picture and sound.The AVR 760/AVR 660 uses HDMI (V.1.3a with Deep Color) technology andis capable of processing both the audio and video components of the HDMIdata, minimizing the number of cable connections in your system. TheAVR 760/AVR 660 implements Deep Color, which increases by an order ofmagnitude the shades of color that can be displayed, and the latest losslessmultichannel audio formats, including Dolby TrueHD and DTS-HD MasterAudio.NOTE: Some DVD-Audio, SACD, Blu-ray Disc and HD-DVD players onlyoutput multichannel audio through their multichannel analog outputs.Make a separate analog audio connection in addition to the HDMIconnection, which is still used for video and to listen to Dolby Digital, DTSor PCM materials that may be stored on the disc.The AVR 760/AVR 660 converts analog video signals to the HDMI format,including its on-screen menus, upscaling to high-definition 1080p resolution.The HDMI connector is shaped for easy plug-in (see Figure 4). If your videodisplay has a DVI input and is HDCP-compliant, use an HDMI-to-DVI adapter(not included). A separate audio connection is required. HDMI cable runs arelimited to about 3 meter.Figure 4 – HDMI ConnectionIf your video display or source device is not HDMI-capable, use one of theanalog video connections (composite, S- or component video) and a separateaudio connection.Coaxial digital audio jacks are usually color-coded in orange. Although theylook similar to analog jacks, you should not connect coaxial digital audiooutputs to analog inputs or vice versa. See Figure 5.CoaxialCoaxial digitalaudio cableFigure 5 – Coaxial Digital AudioOptical digital audio connectors are normally covered by a shutter to protectthem from dust. The shutter opens as the cable is inserted. Input connectorsare color-coded using a black shutter, while outputs use a gray shutter. SeeFigure 6.OpticalOptical digitalaudio cableFigure 6 – Optical Digital Audioanalog audioAnalog connections require two cables, one for the left channel (white) andone for the right channel (red). These two cables are often attached to eachother. See Figure 7.For sources that are capable of both digital and analog audio, you may makeboth connections.The analog audio connection is required for multizone operation, as theAVR 760/AVR 660’s multizone system is not capable of converting a digitalsignal to analog format. Use the analog audio connections even with theSurround Back/Zone 2 speaker outputs, in case another 2-channel digitalaudio source is in use in the main listening area. The AVR 760/AVR 660 is onlycapable of processing one PCM source at a time.You may only record materials from DVDs or other copy-protected sourcesusing analog connections. Remember to comply with all copyright laws, ifyou choose to make a copy for your own personal use.Analog audiocable (RCA)LRFigure 7 – Analog AudioMultichannel analog connections are used with high-definition sources thatdecode the copy-protected digital content, such as some DVD-Audio, SACD,Blu-ray Disc and HD-DVD players. See Figure 8. The multichannel analogaudio connection is not required for players compliant with HDMI version 1.1or better, or that output linear PCM signals via an HDMI connection. Consultthe owner’s guide for your disc player for more information.Multichannelanalog audiocable (RCA)Front Surround CenterWhite Blue GreenRed Gray PurpleSubwooferFigure 8 – Multichannel Analog AudioThe AVR 760/AVR 660 also includes a proprietary, dedicated audio connectionfor The Bridge II docking station for iPod. If you own a docking iPod (mostmodels, 4G or later), connect The Bridge II (included) to The Bridge II port onthe receiver. See Figure 9. Dock your iPod (not included) in The Bridge II, andyou may listen to your audio materials through your high-performance audiosystem. You may view still images or video materials stored on a photo- orvideo-capable iPod that supports video browsing. Use the AVR 760/AVR 660remote to control the iPod, with navigation messages displayed on the frontpanel and on a video display connected to the AVR. The Bridge II outputsanalog audio to the AVR 760/AVR 660, and is available to the multiroomsystem.THE BRIDGE Figure 9 – The Bridge II port