Harman Kardon AVR 147 Owner's Manual

Also see for AVR 147: Brochure & specs Catalog Owner's manual Quick start guide Settings guide

Harman Kardon AVR 147 Owner's Manual Manual pdf 39 page image

39OPERATIONSelecting a Surround ModeSurround mode selection can be as simple or sophisticated as yourindividual system and tastes. Feel free to experiment with the manyavailable surround modes on the AVR 147, and you may find a few thatbecome your favorites for certain sources or program types. Althoughmore detailed information on surround modes may be found in theAdvanced Functions section, it is easy to select any of the modesavailable at a given time:To select a surround mode using the front-panel controls, press theSurround Mode Button repeatedly until the desired group of modes isselected: Logic 7, Dolby, DTS, DSP or Stereo. Then press the SurroundSelect Button repeatedly to select the desired mode within the group.See Figure 75.Figure 75 – Select a Surround Mode (Front Panel)To select a surround mode using the remote control, locate the buttondedicated to the desired group of modes: Logic 7, Dolby Sur, DTS Sur,DTS Neo:6, Surr (DSP) or Stereo. Press that button repeatedly to selectthe desired mode. See Figure 76.Figure 76 – Select a Surround Mode (Remote)To select a surround mode using the full-OSD menu system, press theOSD Button to display the Master Menu. Navigate to the SURROUNDSELECT line and press the Set Button to view the Surround Selectmenu (see Figure 78). Each of the major surround mode groups islisted here. Select a group to access the MODE setting for selection ofan individual mode. As explained in the Advanced Functions section,there are also some additional settings that may be made.You are now ready to enjoy the best in home theater entertainment withyour AVR 147. As you become more familiar with the receiver, you maywish to explore some of its advanced functions, which are described inthe following section.