Harman Kardon AVR 147 Owner's Manual

Also see for AVR 147: Brochure & specs Catalog Owner's manual Quick start guide Settings guide

Harman Kardon AVR 147 Owner's Manual Manual pdf 52 page image

52ADVANCED FUNCTIONSProcessor ResetThere may be instances when you wish to fully reset the AVR 147 to itsfactory defaults, or the unit may behave erratically after a power surge.To correct erratic behavior, first try turning the Master Power Switchoff and unplugging the AC Power Cord for at least 3 minutes. Plug thecord back in and turn the receiver back on. If this doesn’t help, try asystem reset.NOTES:• A system reset erases all user configurations, including speakerand level settings and tuner presets. After a reset, you willneed to re-enter all of these settings.• The RS-232 Reset Button on the rear panel of the AVR 147does not perform a system reset. DO NOT press the RS-232Reset Button.To reset the AVR 147, place the receiver in Standby mode (press thefront-panel Standby/On Switch so that the Power Indicator turns amber).Then press and hold the front-panel Tone Mode Button for at least 5seconds until the RESET message appears in the display.If the receiver still does not function correctly after a processorreset, contact an authorized Harman Kardon service center forassistance. Service centers may be located by visiting our Web siteat www.harmankardon.com.MemoryIf the AVR 147 is unplugged or experiences a power outage, it willretain user settings for up to four weeks.