AVR 330 AUDIO/VIDEO RECEIVER3 Introduction4 Safety Information4 Unpacking5 Front-Panel Controls7 Rear-Panel Connections10 Main Remote Control Functions14 Zone II Remote Control Functions15 Installation and Connections17 System Configuration17 Speaker Placement17 System Setup18 Input Setup19 Surround Setup20 Speaker Setup22 Delay Settings23 Output Level Adjustment23 Using EzSet24 Manual Output Level Adjustment25 Operation25 Basic Operation25 Source Selection25 6-Channel/8-Channel Direct Input25 Volume Control26 Surround Mode Selection26 Digital Audio Playback27 Surround Mode Chart29 Tuner Operation30 Tape Recording30 Output Level Trim Adjustment31 Advanced Features31 Surround Amplifier Channel Assignment31 Display Brightness31 Turn-On Volume Level31 Semi-OSD Settings32 Full-OSD Time-Out Adjustment33 Multiroom Operation33 Multiroom Setup33 Multiroom Operation35 Programming the Remote35 Programming the Remote35 Direct Code Entry35 Auto Search Method35 Code Readout35 Macro Programming36 Programmed Device Functions37 Volume Punch-Through37 Channel Control Punch-Through37 Transport Control Punch-Through37 Reassigning Device Control Selectors38 Resetting the Remote Memory39 Function List41 Setup Code Tables52 Troubleshooting Guide52 Processor Reset53 Technical SpecificationsSee trademark acknowledgements on page 53.2 TABLE OF CONTENTSTypographical ConventionsIn order to help you use this manual with the remote control, front-panel controls and rear-panel connections,certain conventions have been used.EXAMPLE – (bold type) indicates a specific remote control or front-panel button, or rear-panelconnection jackEXAMPLE – (OCR type) indicates a message that is visible on-screen or on the front-panelinformation display1 – (number in a square) indicates a specific front-panel control¡ – (number in a circle) indicates a rear-panel connectiona – (number in an oval) indicates a button or indicator on the remoteå – (letter in an oval) indicates a button on the Zone II remote