12 ZONE II REMOTE CONTROL FUNCTIONSZone II Remote Control Functionså Power Off∫ AVR Selectorç AM/FM Tuner Select∂ Input Selectors≠ Tuning Up/Down – Fast Playƒ Record/Pause© Preset/Track Skip˙ Disc Skipî Volume Up/Down∆ Play Forward/Reverse/Stop˚ MuteNOTE: The Zone II remote may be used in eitherthe same room where the AVR v is located, or itmay be used in a separate room with an option-al infrared sensor that is connected to the AVR’sMulti IR input jack f. When it is used in thesame room as the AVR, it will control the func-tions of the AVR or any compatible HarmanKardon products in that room. When it is used ina separate room via a sensor connected to theMulti IR Jack f, the buttons for power, inputsource, volume and mute will control the sourceand volume for the second zone, as connectedto the Multi Out Jacks •. (See page 37 forcomplete information on using the Multiroomsystem.)The Zone II remote may be used in either thesame room where the AVR is located, or it maybe used in a separate room with an optionalinfrared sensor that is connected to theAVR’s Multi IR input jack .å Power Off: When used in the room wherethe AVR is located, press this button to place theunit in Standby. When it is used in a remoteroom with a sensor that is connected to theMulti IR jack , this button turns the Multi-Room system off.∫ AVR Selector: Press this button to turn onthe AVR. The input in use when the unit was laston will be selected.ç AM/FM Tuner Select: Press this button toselect the Tuner as the input to the Multiroomsystem. Press it again to change between theAM and FM bands.∂ Input Selectors: When the AVR is off,press one of these buttons to turn the unit onand to select a specific input. When the unit isalready in use, pressing one of these buttons willchange the input.≠ Tuning Up/Down – Fast Play: These but-tons may be used to change the frequency ofthe tuner. These buttons may also control theFast Play or Fast Reverse functions of compatibleHarman Kardon CD, DVD or cassette decks inthe same room, or from a remote room when anIR link is connected to the AVR.ƒ Record/Pause: Press this button to acti-vate the Record or Pause function on compatibleHarman Kardon CD, DVD or Cassette Deckproducts.© Preset Up/Down – Track Skip: When theAVR’s tuner is selected as the input source, thesebuttons will move up or down through the list ofstations that have been stored in the presetmemory. When a CD or DVD player is selected,these buttons activate the forward or reversetrack or chapter skip functions.˙ Disc Skip: Press this button to changediscs on compatible Harman Kardon CD or DVDchangers.î Volume Up/Down: When used in theroom where the AVR 330 is located, press thisbutton to raise or lower the volume in thatroom. When it is used in a remote room with asensor that is connected to the Multi IR Jack, this button will raise or lower the volume inthe remote room.∆ Play Forward/Reverse/Stop: Press thesebuttons to control compatible Harman KardonCD, DVD or cassette players.˚ Mute: When used in the room where theAVR is located, press this button to temporarilysilence the unit. When it is used in a remoteroom with a sensor that is connected to theMulti IR Jack , this button will temporarilysilence the feed to the remote room only. Pressthe button again to return to the previous vol-ume level.Important Note: No matter in which room theZone II remote is used, as with the main remoteit is important to remember to press the InputSelector button ∂ that corresponds to theunit you wish to operate befor you change thedevice to be controlled.POWEROFFMUTEAVRAM//FMVID1VID3DVD CD TAPEDN TUNINGPRESETVOLUMEDISC SKIPDISC SKIPUPDNUPVID4VID2GABCDEFHIKJ