Harman Kardon AVR 354 Owner's Manual

Also see for AVR 354: Brochure & specs Quick start guide Service manual Service manual

Contents

Harman Kardon AVR 354 Owner's Manual Manual pdf 57 page image

57ADVANCED FUNCTIONSProcessor ResetThere may be instances when you wish to fully reset the AVR 354 to itsfactory defaults, or the unit may behave erratically after a power surge.To correct erratic behavior, first try turning the Master Power Switch offand unplugging the AC power cord for at least three minutes. Plugthe cord back in and turn the receiver back on. If this doesn’t help,try a system reset.NOTES:• A system reset erases all user configurations, including videoresolution, speaker and level settings, and tuner presets. Aftera reset, you will need to reenter all of these settings.• The RS-232 Reset Button on the rear panel of the AVR 354does not perform a system reset. DO NOT press the RS-232Reset Button.To reset the AVR 354, place the receiver in Standby mode (press thefront-panel Standby/On Switch so that the Power Indicator turns amber).Then press and hold the front-panel OK Button for at least five secondsuntil the RESET message appears in the display.Follow the directions in the note on page 34 to restore the pictureif necessary.If the receiver still does not function correctly after a processor reset,contact an authorized Harman Kardon service center for assistance.Authorized service centers may be located by visiting the Web siteat www.harmankardon.com.MemoryIf the AVR 354 is unplugged or experiences a power outage, it willretain user settings for up to four weeks.