Harman Kardon DVD 50 Service Manual
Also see for DVD 50: BrochureBrochureOwner's manualSpecifications
                                                                            | |
Contents
| 
5 FRONT PANEL CONTROLS1 Power Switch: Press the button once toturn the DVD 50 on; press it again to put theunit in the Standby mode.2 Status Indicator: When the DVD 50 is inthe On mode, this indicator will glow green.When the unit has been placed in the Standbymode by pressing the Power-Off Buttonon the remote, the indicator will glow amber,indicating that the unit is still connected to theAC main supply and is ready to be turned onfrom the remote control.3 Headphone Jack: Connect standard head-phones to this jack for private listening.4 Headphone Level Control: Turn thiscontrol to adjust the volume level to the head-phones. Note that the use of this control willnot change the analog output levels at the rearpanel audio outputs.5 Disc Tray: This tray holds as many as fivecompatible discs that can be played one at atime in the DVD 50.6 Direct Access Buttons: Press one ofthese buttons to play any of up to five discsloaded in the Disc Tray.7 Disc Skip: Press this button to change thedisc being played. Each press of the button willmove the tray forward to the next occupiedposition in the tray. Note that the unit will skipover the empty disc positions.8 Search Forward/Reverse: Press this but-ton to move forward or backward through a CDor DVD at one of four speeds. Each press andrelease will increase the search speed, as indi-cated in the on-screen display. Once you haveselected the desired speed, release the buttonand the disc will continue to search at fastspeed. To resume normal playback speed, pressthe Play Button #.9 Open/Close Button: Press this button toopen or close the Disc Tray 5.) Skip Forward/Reverse: Press this buttonto move forward or backward through themusic tracks on a CD disc or the chapters on aDVD disc.! Stop: Press this button once to place thedisc in the Resume mode, which means thatplayback will stop, but as long as the tray is notopened or the disc changed, DVD playback willcontinue from the same point on the disc whenthe Play button is pressed again. Resume willalso work if the unit was turned off. To stop adisc and have play start from the beginning,press the button twice.@ Pause: Press this button to momentarilypause playback. To resume playback, press thePlay Button #. If a DVD is playing, actionwill freeze and a still picture will be displayedwhen this button is pressed.# Play: Press the button to playback, or toresume playback after the Pause Button @has been pressed.$ Information Display: This display con-tains a variety of indicators that provide infor-mation about the status of the DVD 50 and thedisc currently playing.% Display Dim: Press this button to adjustthe brightness of the Information Display by50% or to turn the display off completely in thefollowing order: FULL BRIGHTNESS ➔ HALFBRIGHTNESS ➔ OFF ➔ FULL BRIGHTNESS.^ Remote Sensor: The sensor that receivesthe infrared commands from the remote controlis behind this area. Do not cover or obscure thispart of the front panel, in order to avoid a mal-function with the remote.29Front Panel Controls1 Power Switch2 Status Indicator3 Headphone Jack4 Headphone Level Control5 Disc Tray6 Direct Access Buttons7 Disc Skip8 Search Forward/Reverse9 Open/Close Button) Skip Forward/Reverse! Stop@ Pause# Play$ Information Display% Display Dim^ Remote Sensor1 2 3 4 5 6 7 8 9 )^ % $ # @ ! |
Related manuals for Harman Kardon DVD 50
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine