8 REAR PANEL CONNECTIONSRear Panel ConnectionsTHIS PRODUCT COMPLIES WITH APPLICABLEREQUIREMENT OF THE DHHS PERFORMANCESTANDARD FOR LASER PRODUCTS,21 CFR SUBCHAPTER J.DHHS CODE : GVWARNING : SHOCK HAZARD-DO NOT OPEN!AVERTISSEMENT : RISQUE DE CHOC ELECTRIQUE-NEPAS OUVRIR!CLASS 1 LASER PRODUCTKLASSE 1 LASER PRODUKTLUOKAN 1 LASER LAITEKLASS 1 LASER APPARATCLASSE 1 PRODUIT LASERRISK OF ELECTRIC SHOCK.DO NOT OPEN.CAUTIONCAUTIONVISIBLE AND INVISIBLE LASERRADIATION WHEN OPEN.DO NOT STARE INTO BEAM ORVIEW DIRECTLY WITH OPTICALINSTRUMENTS.MODEL NO. DVD 50harman / kardonNORTHRIDGECALIFORNIA 91329, USAMADE IN KOREAManufactured/Date De Fab.:Serial No./No. De Series"DTS" and "DTS Digital Out" are trademarks ofDigital Theater Systems, Inc.Appartus Claims of U.S. Patent Nos. 4,631,603,4,577,216, 4,819,098, and 4,907,093 licensedfor limited viewing uses only.AC INPUT100-240VAC 50/60Hz 18WVIDEO OUTDIGITAL OUTAUDIO OUTS-VIDEOPROGRESSIVE/COMPONENTSCAN VIDEOOPTICAL COAXIALPrPbYCOMPOSITERLREMOTECONTROLOUTIN¡ ™ £ ¢ ∞ª • ¶ §Manufactured under license from Dolby Laboratories."Dolby" ,"Pro Logic", and the double-D symbolare trademarks of Dolby Laboratories.Confidential unpublished works.Copyright 1992-1997 Dolby Laboratories.All rights reserved.¡ Remote Control Input™ Remote Control Output£ Analog Audio Outputs¢ Component Video Outputs∞ Composite Video Output§ S-Video Output¶ Coaxial Digital Output• Optical Digital Outputª AC Power Cord¡ Remote Control Input: Connect theoutput of a remote infrared sensor, or theremote control output of another compatibleHarman Kardon product, to this jack. This willenable the remote control to operate evenwhen the front panel Remote Sensor ^ isblocked. This jack may also be used with com-patible IR remote control-based automationsystems.™ Remote Control Output: Connect thisjack to the infrared (IR) input jack of anothercompatible Harman Kardon remote-controlledproduct to have the built-in Remote Sensor^ on the DVD 50 provide IR signals to othercompatible products.£ Analog Audio Outputs: Connect thesejacks to an audio input on an A/V receiver orsurround processor for analog audio playback.¢ Component Video Outputs: These out-puts carry the component video signals for con-nection to analog or digital display monitorswith component video inputs. For standardanalog TVs or projectors with inputs markedY/Pr/Pb or Y/Cr/Cb, connect these outputs tothe matching inputs. If you have a digital televi-sion that is compatible with high scan ratevideo, connect these jacks to the “HDComponent” inputs. note that a change mustbe made to the setup menus in order to takeadvantage of the progressive scan circuitry. Seepage 22 for more information on progressivescan video. Note that these jacks should NOTbe connected to standard composite videoinputs.∞ Composite Video Output: Connect thisjack to the video input on a television or videoprojector, or to a video input on an A/V receiveror processor if you are using that type of devicefor video input switching.§ S-Video Output: Connect this jack to theS-Video input on a television or video projector,or to an S-Video input on an A/V receiver orprocessor if you are using that type of devicefor S-Video input switching.¶ Coaxial Digital Output: Connect this jackto the coaxial digital input of an A/V receiver orsurround processor for Dolby Digital, DTS orPCM audio playback.NOTE: The coaxial digital output should only beconnected to a digital input. Even though it isthe same RCA-type connector as standard ana-log audio connections, DO NOT connect it to aconventional analog input jack.• Optical Digital Output: Connect this jackto the optical digital input of an A/V receiver orsurround processor for Dolby Digital, DTS orPCM audio playback.ª AC Power Cord: Connect this plug to anAC outlet. If the outlet is controlled by a switch,make certain that it is in the ON position.