Harman Kardon DVD 506 Owner's Manual
Also see for DVD 506: Service manual
                      | |
Contents
|
10 REAR PANEL CONNECTIONSRear Panel Connections¡ Optical Digital Output™ Coaxial Digital Output£ Analog Audio Outputs¢ Composite Video Output∞ S-Video Output§ Component Video Outputs¶ Scart TV Output• Remote Control Outputª Remote Control Input‚ AC Power Cord¡ Optical Digital Output: Connect this jackto the optical digital input of an A/V receiver orsurround processor for Dolby Digital, DTS orPCM audio playback.™ Coaxial Digital Output: Connect this jackto the coaxial digital input of an A/V receiver orsurround processor for Dolby Digital, DTS orPCM audio playback.NOTE: The coaxial digital output should only beconnected to a digital input. Even though it isthe same RCA-type connector as standard ana-log audio connections, DO NOT connect it to aconventional analog input jack.£ Analog Audio Outputs: Connect thesejacks to the analog audio input on an A/Vreceiver or surround processor for analog audioplayback.¢ Composite Video Output: Connect thisjack to the video input on a television or videoprojector, or to a video input on an A/V receiveror processor if you are using that type of devicefor video input switching.∞ S-Video Output: Connect this jack to theS-Video input on a television or video projector,or to an S-Video input on an A/V receiver orprocessor if you are using that type of device forS-Video input switching.§ Component Video Outputs: These out-puts carry the component video signals for con-nection to display monitors with componentvideo inputs. For standard analog TV's or projec-tors with inputs marked Y/Pr/Pb or Y/Cr/Cb, con-nect these outputs to the corresponding inputs.If you have a high-definition television or projec-tor that is compatible with high scan rate pro-gressive video, connect these jacks to the “HDComponent” inputs. Note that if you are using aprogressive scan display device, then”Progressive” must be selected in the Video Set-up Menu in order to take advantage of the pro-gressive scan circuitry. See page 17 for moreinformation on progressive scan video.IMPORTANT: These jacks should NOT be con-nected to standard composite video inputs.¶ SCART OUT (TV): If your TV has a SCARTsocket, you can connect a SCART cable to yourTV and to your DVD Player for improved videoquality. The SCART cable carries both audio andvideo. You can select Composite Video or RGBvideo for that SCART connector’s video outputsignal.• Remote Control Output: Connect thisjack to the infrared (IR) input jack of anothercompatible Harman Kardon remote controlledproduct to have the built-in Remote Sensor onthe DVD provide IR signals to other compatibleproducts.ª Remote Control Input: Connect the out-put of a remote infrared sensor, or the remotecontrol output of another compatible HarmanKardon product, to this jack. This will enable theremote control to operate even when the frontpanel Remote Sensor on the DVD is blocked.This jack may also be used with compatible IRremote control-based automation systems.‚ AC Power Cord: Connect this plug to anAC outlet. If the outlet is controlled by a switch,make certain that it is in the ON position.Note: You’ll find more details about allAudio/Video connections under Setup andConnections on the following pages. |
Related manuals for Harman Kardon DVD 506
Harman Kardon DVD 5 Owner's Manual
Harman Kardon DVD 5 Owner's Manual
Harman Kardon DVD 27 Owner's Manual
Harman Kardon DVD 30 Owner's Manual
Harman Kardon DVD 22 Owner's Manual
Harman Kardon DVD 20 Owner's Manual
Harman Kardon DVD 47 Owner's Manual
Harman Kardon DVD 25 Owner's Manual
Harman Kardon DVD 38 Owner's Manual
Harman Kardon DVD 48 Owner's Manual
manualsdatabase
Your AI-powered manual search engine