Harman Kardon Sabre SB 35 Owner's Manual

Also see for Sabre SB35: Features and benefits Quick start guide Features Owner's manual

Contents

Operation11SB35Turning the Subwoofer ON and OFFthe subwoofer will automatically turn itself On when it senses an audio signal, and itwill return to Standby mode when the SABRE SB35 goes into standby mode.Pairing the Units for Wireless OperationAfter turning the soundbar and subwoofer On for the first time, you will need to pairthe subwoofer and soundbar so they both operate at the same wireless frequency. topair the units, press the wireless pairing switches on both the units within 30 secondsinterval. the units will communicate with each other and operate at the same frequency.NOTE: The subwoofer enters Standby mode if the pairing gets disconnectedfor at least 30 seconds.The LED will stop blinking and remain asolid blue color when pairedAUX INOPTICALDC IN 24V 2.7AIR TRANSMITTERPAIRING FW UPGRADEHDMI 3HDMI 2HDMI 1HDMI TVFront Panel and On-screen Information Display (OSD)the SABRE SB35 is equipped with a front panel display behind the grill of the soundbaras well as a On-Screen information display (OSd) that will appear on the screen of a tVconnected to the HdMI ARC tV Out connector to help you verify the operating statusof the SB35. the OSd will overlay on top of the tV’s video program for five secondsafter pressing a button on the soundbar or remote. (when you select an audio-onlysource connection such as Aux, Optical, or Bluetooth, the OSd information will overlaya black screen with Harman Kardon logo). the front panel display will also light up for 5seconds after pressing a button on the soundbar or remote in the same manner.• Volume control: when changing the volume of the system, both willdisplay the volume level indication.• Subwoofer volume control: when changing the subwoofer volume,independent from the main volume control, both will display the subwoofervolume level indication.• Mute: when the audio signal is mute, both will display Mute.• Source: the OSd and the front panel will indicate the source input selected.• Harman Volume: the OSd and the front panel will indicate if Harmanvolume is high, low or off.• Surround mode: the OSd and the front panel will indicate if the Soundbaris in Stereo or Harman display surround mode.• Dolby® Digital: If a dolby digital audio stream is sensed by the soundbar,both will indicate that the dolby digital decoding is active.• DTS®: If a dtS audio stream is sensed by the soundbar the both will indicatethat the dtS decoding is active.• Bluetooth: the following information is displayed in the OSd and the frontpanel during Bluetooth operation:• Bluetooth pairing - when the SABRE SB35 is in pairing mode• Bluetooth connected - when the connection to a new device issuccessful• Bluetooth - when the source Bluetooth is operatedIn addition to the status information, the OSd will also display messages if the selectedHdMI connection cannot be detected or if the video signal is lost.Operating through Bluetooth®to wirelessly stream audio to the SABRE SB35 from a Bluetooth-enabled device:1. Confirm that the SABRE SB35 is in the Bluetooth pairingmode. the OSd will display Bluetooth pairing.2.5s2. place the device in pairing mode.3. Use the device’s Bluetooth pairing menu to pair it with the SABRE SB35.the system will appear as SABRE SB35 in the list of Bluetooth availabledevices. the OSd will display Bluetooth connected.when the SABRE SB35’s Bluetooth button lEd illuminates constantly, it is paired withthe device and you can stream audio via Bluetooth from the device to the SABRE SB35.to listen to audio from the Bluetooth device, press the source button until the Bluetoothsource indicator lEd illuminates.SABRE SB35