Harman Kardon Sabre SB 35 Owner's Manual

Also see for Sabre SB35: Features and benefits Quick start guide Features Owner's manual

Contents

Introduction5SB35SURROUND SOURCEPower Button: the power button turns the SABRE SB35 On/OFF. when the SABRESB35 is in Standby mode (power Indicator is amber), press this button to turn the SABRESB35 system On (power Indicator turns white).NOTE: When the SABRE SB35 goes automatically to Standby mode, it willautomatically turn ON whenever it detects an audio signal at the Sourceinputs. The SB35 will also automatically wake up from the following sourcesif it was on those sources before going to auto-standby.• Optical audio input• Analog audio inputFor example, if the source input is analog audio when the SABRE SB35 goes to automaticStandby, it does not wake up even if it senses an audio signal from the optical audioinput.when the SABRE SB35 system is On, short press the power button to put the system inStandby mode (the power Indicator turns amber).NOTE: The system will remain ON for approximately 10 minutes after theaudio signal ceases, and will then automatically go into the Standby mode.Bluetooth (BT): this button pairs your system with other Bluetooth-enabled devices.NOTE: SB 35’s Bluetooth device name is SABRE SB35.Volume Up/Down Buttons: press the (–) button to reduce the volume; press the (+)button to increase the volume.NOTE: Pressing both the SABRE SB35’s Volume buttons at the same timewhile the system is ON will mute the system. Pressing either Volumebuttons while the system is mute will restore the sound.Surround Mode Button: this button turns the SABRE SB35 system’s Harman wAVEor Virtual Surround processing On and OFF. the text will be displayed on the paneldisplay appropriately.Source Button: press the SABRE SB35’s Source button to cycle between the sources inthe following order:1. Bluetooth2. AUX input3. digital Optical In4. HdMI ARC5. HdMI 16. HdMI 27. HdMI 3SABRE SB35 Rear Panel Controls and Connectionsthe rear panel of the SABRE SB35 soundbar includes the following:1. Subwoofer pairing button2. AUX input (analog audio in)3. Optical (digital optical audio in)4. power input dC5. IR transmitter (optional)6. USB port (software update only)7. HdMI 3 (HdMI input)8. HdMI 2 (HdMI input)9. HdMI 1 (HdMI input)10. HdMI tV (support Audio Return Channel)Subwoofer pairing button: press the subwoofer pairing button to initiate pairingbetween soundbar and the wireless subwoofer.AUX input (analog audio in): Connect your system to other devices using an AUXcable.79810612435AUX INOPTICALDC IN 24V 2.7AIR TRANSMITTERPAIRING FW UPGRADEHDMI 3HDMI 2HDMI 1HDMI TV