Chapter 6: Receiver Configuration Modules DVB-ATM Receiver Configuration© Harmonic Inc. Manual p/n 101543/Ver 1.0 6-36 ProView 2900 Series/SW Version 1.946.4. DVB-ATM Receiver ConfigurationThis section details the ProView 2900 Front Panel and Web Manager menus that enableconfiguring the DVB-ATM receiver in a ProView 2900 DVB-ATM front end device.The following is the DVB-ATM Receiver Configuration menu as displayed on theProView 2900 front panel screen:GeneralGeneralGeneralGeneral 1111----2222----11111111 ModeModeModeMode DS3DS3DS3DS32222 VPI AddressVPI AddressVPI AddressVPI Address 010101012222 VCI AddressVCI AddressVCI AddressVCI Address 00200020002000204444 FECFECFECFEC ENABLEENABLEENABLEENABLEThe available options are:• Mode – this parameter allows the user to set the operational mode of the ATM receiver.• VPI Address –this parameter allows the user to set the path address for the ATMreceiver.• VCI Address – this parameter allows the user to set the channel address for the ATMreceiver.• FEC – this parameter allows the user to enable FEC for the ATM receiver.Figure 6-8 illustrates the structure of the configuration tree menu for the IP receiver.Figure 6-8: DVB-ATM Receiver Configuration Menu Tree Structure
