Chapter 7: Stream Configuration Menu Stream Filtering Configuration© Harmonic Inc. Manual p/n 101543/Ver 1.0 7-16 ProView 2900 Series/SW Version 1.947.5.5. Select PIDsThe PID menu screen is a feature that allows the user to select PIDs on the ProView 2900 ASIand IP output ports. The following describes PIDs selection in filtering mode through the frontpanel and the web-interface.7.5.5.1. Select PIDs Using the Front Panel InterfacePID menu is located at ConfigurationStream FilteringPIDPIDPIDPIDPID 1111----2222----2222----4444----22221111 Select From ServiceSelect From ServiceSelect From ServiceSelect From Service2 Add2 Add2 Add2 Add 00000000000000003 Remove3 Remove3 Remove3 Remove 00000000000000004 Selected List4 Selected List4 Selected List4 Selected List5 Clear All5 Clear All5 Clear All5 Clear All OFFOFFOFFOFFPID menu includes the following parameters:• Select from Service - This table menu lists all available PIDs on the received transport-stream. It allows selection of specific PIDs from a service to be filtered. The select fromservice table menu consist of the following parameters:• NAME – The service name• ID – The service identification symbol [Hex]• TYPE Service type options: TV, Radio, TLTX, NVOD, MOSAIC, PAL, SECAM, MAC, FM,NTSC, and Data.• MODE – Indicates if the service is encrypted (CAS) or free to air (FTA).For example:When selecting a Service listed at the Select from Service table menu, a list of allavailable PIDs of the selected services is displayed, and the user can select specificPIDs.000A000A000A000A1111 SELECT ALLSELECT ALLSELECT ALLSELECT ALL2222 REMOVE ALLREMOVE ALLREMOVE ALLREMOVE ALL3333 0100010001000100----PMTPMTPMTPMT4444 0101010101010101----PCRPCRPCRPCRThe selected service's ID is displayed at the title. The first two parameters of everyservice list are:• SELECT ALL – Select all PIDs of the current service.• REMOVE ALL – Remove all PID's of the current service.The rest of the list includes available PIDs next to the PID' type. ADD - This parameter allows the user to manually add PIDs by using the keypad and enter thePID symbol [Hex]. The available values range is 0000 to 1FFF [Hex]. Remove - This parameter allows the user to manually remove PIDs from being filtered by usingthe keypad and enter the PID symbol [Hex]. The available values range is 0000 to 1FFF [Hex]. Selected List - This screen displays all selected PIDs, For example: 010A. Clear All - This parameter allows clearing all selected PIDs-to-filter list. The available optionsare: OFF (clear list is disabled) or ON (clear list is active).
