Harsco Industrial SC-1500 Owner's Manual

Also see for P-K SONIC SC-3000: Installation & owner's manual Installation & owner's manual Installation & owner's manual

Contents

Harsco Industrial SC-1500 Owner's Manual Manual pdf 42 page image

P-K SONIC TM Gas Fired BoilerTTTTechnical Service 1.877.728.5351echnical Service 1.877.728.5351echnical Service 1.877.728.5351echnical Service 1.877.728.53514 Operations4.1 NURO Touchscreen Control System4.1.1 NURO Control PanelOnce the boiler has been installed in compliance with this manual, it isnecessary to open the front door of the boiler in order to access thepower (on/off) switch located in the upper left hand corner of theNURO control panels.The SC-1500, SC-2000 and the SC-3000 and SC-4000 are below:Do not use this boiler if any parthas been under water.Immediately call a qualifiedservice technician to inspect theboiler and to replace any part ofthe control system and any gascontrol which has been underwater. Failure to do so couldresult in electrocution, injury, ordeath.If overheating occurs or the gassupply fails to shut off, do notturn off or disconnect theelectrical supply to the pump.Instead, shut off the gas supplyat a location external to theboiler.NOTICE!The heat exchanger is constructedand stamped for 125 psigmaximum operating pressure and220°F maximum temperature.4.1.2 NURO Touch Screen InterfaceOnce the boiler is switched to the “ON” position, the P-K MACH®boiler can be programmed and operated with the NURO touch screeninterface located on the front door as shown to the right. A clearplastic cover protects the touch screen which can be opened bypinching the clasp and swinging open to the left.4.1.3 Factory TestsSafe lighting and other performance criteria were met with the gasmanifold and control assembly provided on this boiler when the boilerunderwent factory tests specified in ANSI Z21.13/CSA 4.9, latestedition. (See "Factory Firetest" label.).