Hartmann Veroval Instructions For Use Manual

Also see for Veroval: Instructions for use Instructions for use Instructions for use Instructions for use Instructions for use

Hartmann Veroval Instructions For Use Manual Manual pdf 88 page image

88EnglishGBIf the data transfer is unsuccessful, an error message is displayed on the bloodpressure monitor, as shown in Fig. 2.Fig. 2In that case, remove the connection to the PC and start the data transfer again.The blood pressure monitor switches off automatically after 10 seconds of inac-tivity and when communication with the PC is interrupted.8. Error messagesSpecificErrorPossible causes RemedyMonitor cannotbe switched onBatteries are missing,inserted incorrectly orflat.Check batteries and insert fouridentical new batteries if nec-essary.Power supply unit notcorrectly connected orfaulty.Plug the power supply unit intothe connector socket on theback of the monitor.Cuff will notinflateCuff connector plug isincorrectly positioned inthe connector socket ofthe monitor.Check the connection betweenthe cuff connector plug andsocket.Wrong cuff type con-nected.Verify that only an approvedVeroval ® cuff and connector arebeing used.E I Pulse could not bedetected correctly.Check whether the cuff hasbeen applied correctly. Do nottalk or move during the measur-ing procedure.E2 The pulse could not bedetected.Check whether the cuff hasbeen positioned correctly. Donot talk or move during themeasuring procedure.