I-Tech JKP115-801e User Manual

Contents

I-Tech JKP115-801e User Manual Manual pdf 11 page image

INSTALLATIONWhere to Place the SwitchThe enclosure of the JKP1 Switch is designed for standalone or rack-mount configuration. The Switch isnatively rack-mountable in a standard 1U (19”) server rack. Rack-mount hardware is included with yourswitch for a sturdy rack installation.Cautions and WarningsAvoid placing cables near machines that create electrical noise such as fluorescent lighting, airconditioning equipment, etc.Important InformationBefore you begin, make sure that power to all the computers you will beconnecting has been powered off.To prevent damage to your installation due to ground potential difference, makesure that all computers on the installation are properly grounded. Failure tofollow these instructions can result in damage to computers and / or the Switch.Installing the Switch into a Server RackUnlike other traditional rack mounted LCD KVM units the JKP1 series requires only one person forinstallation. The JKP1 series includes 2 adjustable sliding rack mount brackets for installation in 19-inchrack systems. The sliding brackets feature adjustable positions for rack depths of 22-36 inches.Important InformationInstalling and or removing the Switch (module and chassis) improperly could voidyour warranty. If you are uncertain what to do please contact our technical support.