Reset PC NameThis function resets PC Name settings to default values.Quick View Scan ModeThe Quick View Scan feature allows you to monitor the activity of the connected computers at regularintervals so that you can monitor the computer activity without having to take the trouble of switchingyourself. This time interval can be changed as desired.Note: 1.The interval between these two keys should be no more than 0.5 seconds. Once the scanning begins, it continuesuntil you press any key to exit Quick View Scan Mode.2. A Port LED will flash indicating that the connected computer is under Auto Scan mode.Setting the Quick View Scan TimeThe scan time or the time the Switch spends on each port can be changed using either Hot Keys or OSD.Password Security – Locking Server AccessAdministrators can set a unique password to restrict access to computers connected to the JKP1 switch.Changing your PasswordTo set a new password, do the following:1. Invoke the Hot Key mode by pressing the [SCROLL LOCK] key twice within two seconds.2. Key in [R]3. Enter old password (up to 15 characters).4. Enter the new password (up to 15 characters).5. Re-enter the new password for confirmation.Hotkey Beeper ConfirmationThe beeper function can be turned on and off as desired using the following Hotkey sequence: