IAI ROBO Cylinder RCP2 Operation Manual

Also see for ROBO Cylinder RCP2 Series: Operating manual First step guide Quick start guide First step guide Operating manual

Contents

IAI ROBO Cylinder RCP2 Operation Manual Manual pdf 7 page image

11Safety Guide“Safety Guide” has been written to use the machine safely and so prevent personal injury orproperty damage beforehand. Make sure to read it before the operation of this product.Safety Precautions for Our ProductsThe common safety precautions for the use of any of our robots in each operation.No. OperationDescription Description1 ModelSelection● This product has not been planned and designed for the applicationwhere high level of safety is required, so the guarantee of the protectionof human life is impossible. Accordingly, do not use it in any of thefollowing applications.1) Medical equipment used to maintain, control or otherwise affecthuman life or physical health.2) Mechanisms and machinery designed for the purpose of moving ortransporting people (For vehicle, railway facility or air navigationfacility)3) Important safety parts of machinery (Safety device, etc.)● Do not use the product outside the specifications. Failure to do so mayconsiderably shorten the life of the product.● Do not use it in any of the following environments.1) Location where there is any inflammable gas, inflammable object orexplosive2) Place with potential exposure to radiation3) Location with the ambient temperature or relative humidity exceedingthe specification range4) Location where radiant heat is added from direct sunlight or otherlarge heat source5) Location where condensation occurs due to abrupt temperaturechanges6) Location where there is any corrosive gas (sulfuric acid orhydrochloric acid)7) Location exposed to significant amount of dust, salt or iron powder8) Location subject to direct vibration or impact● For an actuator used in vertical orientation, select a model which isequipped with a brake. If selecting a model with no brake, the movingpart may drop when the power is turned OFF and may cause anaccident such as an injury or damage on the work piece.