2. Installation462. Installation2.1 Transportation[1] Handling of Robot(1) Handling of the Packed ProductUnless otherwise specified, the actuator is shipped with each axis packaged separately.• Do not damage or drop. The package is not applied with any special treatment that enables it toresist an impact caused by a drop or crash.• Transport a heavy package with at least more than two operators. Consider an appropriate methodfor transportation.• Keep the unit in horizontal orientation when placing it on the ground or transporting. Follow theinstruction if there is any for the packaging condition.• Do not step or sit on the package.• Do not put any load that may cause a deformation or breakage of the package.(2) Handling the Actuator After Unpacking• Do not carry an actuator by motor unit and a cable or attempt to move it by pulling the cable.• Be careful not to bump the actuator into anything when moving it.• Hold the body base when transporting the actuator.• Do not attempt to force any part of the actuator. Take particular care not to apply pressure to thestainless steel sheet.Supplement) For the names of each part of the actuator, refer to "Name of the Parts.”
