177Parallel Mode 1Purpose:To control the pull-up resistors on the parallel port signals. This menu item is useful for personalcomputers that have open collector outputs on the parallel port signals.Values:Parallel Mode 2Purpose:To determine whether the parallel port data is sampled on the leading or trailing edge of strobe.Values:PCL SmartSwitchPurpose:To configure the printer so it automatically switches to PCL emulation when a print job receivedthrough the parallel port requires it, regardless of the default printer language.Values:See also:Printer Language; PS SmartSwitchOn Disables the resistors.Off* Enables the resistors.On* Samples parallel port data on the leading edge of strobe.Off Samples parallel port data on the trailing edge of strobe.On* Printer examines data on the parallel interface and selects PCL emulation if the dataindicates that is the required printer language.Off Printer does not examine the incoming data. The printer uses PostScript emulation toprocess the job if PS SmartSwitch is On, or uses the default printer language specified in theSetup Menu if PS SmartSwitch is Off.
