86Load ManualWhat this message means:A request for a manual feed job has been sent to the printer. The printer is ready for insertionof a single sheet into the manual feed slot.What you can do:• Load a sheet of the paper specified in the second line of the display in the manual feed tray ormultipurpose feeder.• Press Select or Go to ignore the manual feed request and print on paper already installed inone of the input sources. If the printer finds a tray that has paper of the correct type and size, itfeeds paper from that tray. If the printer cannot find a tray with the correct paper type and size,it prints on whatever paper is installed in the default input source.• Press Menu to open the Job Menu and cancel the current job.See also:Loading the multipurpose feederLoad Plain LetterWhat this message means:Someone has initiated a tray calibration procedure.What you can do:• Load paper into and press Go to continue the calibration process.See also:Calibrating Tray ; Tray Not CalibratedLoad StaplesWhat this message means:The printer is trying to staple a print job, but the stapler is empty.What you can do:• Install a new staple cartridge in the stapler.• Press Go to clear the message and continue printing without stapling.• Press Menu to open the Job Menu and cancel the current job.
