IBM 27L2579 User Manual

Installing the DVD Drive in theUltraslimBayThis section describes how to install the DVD drive. Before youbegin the installation, make sure that the DVD Software CD-ROM,which includes software programs, was shipped with the DVD drive.If a device is already installed in the UltraslimBay, go to “Removing aDevice from the UltraslimBay.”If no device is installed, go to “Installing the DVD Drive in theUltraslimBay” on page 1-3.Removing a Device from the UltraslimBayTo remove a device from the UltraslimBay, do as follows:1 Make sure there is no storage media inserted in the device.2 Power off the computer, and remove the AC Adapter andcables; then turn the computer upside down.3 Push the UltraslimBay device lock to the unlocked position 1 ;then remove the device from the bay 2 .21You have now finished removing the device.Notes:1. If you want to warm swap the device in the UltraslimBay, youneed to install the hot/warm swap driver.2. Make sure that the bay LED is off. Never remove theUltraslimBay device when the bay LED is on.1-2