Token Ring MenuItem Value DescriptionNETBIOS ON*OFFTurns NetBIOS communications on or off.v ON—enables NetBIOS communications.v OFF—disables NetBIOS communications.APPLETALK ON*OFFTurns AppleTalk communications on or off.v ON—enables AppleTalk communications.v OFF—disables AppleTalk communications.MAC ADDRESS nn.nn.nn.nn.nn.nn Specifies the MAC (medium access control) number of theprinter.Note: Normally, the MAC ADDRESS should be set to theunique MAC ADDRESS on the network interface card. Youcan, however, also use the MAC ADDRESS field to definelocally administered addresses (LAA). Resetting the printerto factory defaults sets the LAA back to the MAC address.Each LAA must be unique, so make sure to consult yournetwork or LAN administrator before changing this value.See “Setting the Locally Administered MAC Address(LAA)” on page 212 for more information.Ethernet MenuImportant!For information about configuring the Ethernet attachment, please seeEthernet and Token Ring Quick Configuration Guide, which comes with theEthernet Network Interface Card. “Chapter 9. Configuring PrinterNetwork Addresses” on page 211 describes how to define the IP address,default gateway address, and subnet mask from the operator panel.Use the Ethernet Menu to configure the Ethernet attachment. The followingtable describes the settings you can change from the Ethernet Menu. Anasterisk (*) next to a value in the table indicates the factory default. TheEthernet Menu appears only if you have the Ethernet attachment installed.Notes:1. To select a new value, press the Enter key when the value is displayed inthe message display area. An asterisk (*) appears next to the value in themessage display area, indicating that it is now active.2. If you are unfamiliar with using the operator panel to work with menus,please read “Using the Operator Panel Keys” on page 23 and “NavigatingMenus” on page 24 before continuing.124 Infoprint 32 and Infoprint 40: User’s Guide
