1034 The Configuration MenusConfiguration OverviewThis chapter describes the configuration menus. The Configuration MainMenu options and all of the submenu options are illustrated in menu diagramsand described in detail. For procedures showing how to enter Program mode,save, recall, and print configurations, refer to Chapter 3, “Configuring thePrinter” on page 79.Figure 66 shows an overview of the configuration menus.The menus that are displayed from the operator panel are determinedby the installed features. For example, if you ordered the IPDSfeature, then the IPDS menu would appear on the operator panel. Ifthe IPDS feature is not installed, then the IPDS menu will not appearon the operator panel.Each feature is shipped with a document that describes the feature indetail. For more information about these documents, see “RelatedDocuments” on page 15.The configuration menu diagram on page 104 shows the structure of theconfiguration menus and the parameter options available in each menu. Thediagrams list the menus and options in the order they appear when you usethe operator panel to configure the printer. Factory default configurationvalues are indicated by an asterisk ( *).Pressing the operator panel keys (Enter, Return, Scroll↑, and Scroll↓)allows you to move through the menus and select various choices for theoptions, as follows:• The Enter key allows you to move down to a lower level in the menustructure, and to select an option value as the active value.• The Return key moves you back up the menu structure.• The Scroll↑ key moves forward through the options at a particular menulevel.• The Scroll↓ key moves backward through the options at a particularmenu level.These keys are summarized in a legend box at the lower right corner of eachconfiguration menu diagram.
