44Chapter 2 Removing Shipping Restraints (Pedestal Model)Removing Shipping Restraints (Pedestal Model)Protective films and foam blocks protect printer mechanisms from possibledamage during shipment. You must remove these shipping restraints beforeyou operate the printer.Save the foam blocks with the other packing materials.To avoid shipping damage, reinstall the shipping restraints whenever theprinter is moved or shipped. To reinstall the shipping restraints, simplyreverse the steps in this section.Remove the Protective Film and EnvelopeFigure 16. Pedestal Model with Cover Open Showing Removal of the Operator PanelMessage Display Protective Film and Sample Configuration Printout Envelope1. Raise the printer cover.2. Carefully peel off the tape and lift the protective film off the operator panelmessage display.3. Open the tractor doors.4. Push the tractor locks down.5. Slide the tractors outward as far as they will go. The forms thickness levershould be raised (in the fully open position).6. Remove the envelope that contains the sample configuration printout.Store this envelope in a safe place so that you can refer to theconfiguration printout.EnvelopeProtectiveFilm
