IBM 6826 Hardware Maintenance Manual

Also see for NetVista: Hardware Maintenance Manual Hardware Maintenance Manual Hardware maintenance guide Hardware Maintenance Manual Hardware maintenance guide

Contents

Diagnostic error codesRefer to the following diagnostic error codes when using the diagnostic tests. See″Diagnostics″ on page 9 for the specific type for information about the Diagnosticprograms.In the following index, X can represent any number.Diagnostic Error Code FRU/Action000-000-XXXBIOS Test Passed 1. No action000-002-XXXBIOS Timeout 1. Flash the system2. System board000-024-XXXBIOS Addressing test failure 1. Flash the system2. System board000-025-XXXBIOS Checksum Value error 1. Flash the system2. Boot block3. System board000-026-XXXFLASH data error 1. Flash the system2. Boot block3. System board000-027-XXXBIOS Configuration/Setup error 1. Run Setup2. Flash the system3. Boot block4. System board000-034-XXXBIOS Buffer Allocation failure 1. Reboot the system2. Flash the system3. Run memory test4. System board000-035-XXXBIOS Reset Condition detected 1. Flash the system2. System board000-036-XXXBIOS Register error 1. Flash the system2. Boot block3. System board000-038-XXXBIOS Extension failure 1. Flash the system2. Adapter card3. System board000-039-XXXBIOS DMI data error 1. Flash the system2. System board000-195-XXXBIOS Test aborted by user 1. Information2. Re-start the test, if necessary000-196-XXXBIOS test halt, error threshold exceeded 1. Press F3 to review the log file2. Re-start the test to reset the log fileChapter 7. Symptom-to-FRU Index 39