IBM 6826 Hardware Maintenance Manual

Also see for NetVista: Hardware Maintenance Manual Hardware Maintenance Manual Hardware maintenance guide Hardware Maintenance Manual Hardware maintenance guide

Contents

Diagnostic Error Code FRU/Action000-197-XXXBIOS test warning 1. Make sure the component that is calledout is connected and/or enabled2. Re-run test3. Component that is called out in warningstatement4. Component under test000-198-XXXBIOS test aborted 1. If a component is called out, make sureit is connected and/or enabled2. Flash the system and re-test3. Go to the ″Undetermined problems″section000-199-XXXBIOS test failed, cause unknown 1. Go to the ″Undetermined problems″section2. Flash the system and re-test3. Replace component under function test000-250-XXXBIOS APM failure 1. Flash the system2. System board000-270-XXXBIOS ACPI failure 1. Flash the system2. System board001-000-XXXSystem Test Passed 1. No action001-00X-XXXSystem Error 1. System board001-01X-XXXSystem Error 1. System board001-024-XXXSystem Addressing test failure 1. System board001-025-XXXSystem Checksum Value error 1. Flash the system2. System board001-026-XXXSystem FLASH data error 1. Flash the system2. System board001-027-XXXSystem Configuration/Setup error 1. Run Setup2. Flash the system3. System board001-032-XXXSystem Device Controller failure 1. System board001-034-XXXSystem Device Buffer Allocation failure 1. Reboot the system2. Flash the system3. Run memory test4. System board001-035-XXXSystem Device Reset condition detected 1. System board001-036-XXXSystem Register error 1. System board40 Hardware Maintenance Manual