2. Remove the adapter slot cover for the appropriate expansion slot.3. Remove the adapter from its static-protective package.4. Install the adapter into the appropriate slot on the system board.5. Install the screws that secure the adapter.What to do nextv To work with another option, go to the appropriate section.v To complete the installation, go to “Replacing the cover and connecting thecables” on page 52.Installing internal drivesThis section provides information and instructions for installing and removinginternal drives.Internal drives are devices that your computer uses to read and store data. You canadd drives to your computer to increase storage capacity and to enable yourcomputer to read other types of media. Some of the different drives that areavailable for your computer are:v Hard disk drivesv Tape drivesv CD drives or DVD drivesv Removable media drivesInternal drives are installed in bays. Within this book, the bays are referred to asbay 1, bay 2, and so on.Chapter 5. Installing internal options — microtower model 47