IBM NetVista N70 Reference

Contents

Table 5. POST error codes (continued)POST Error Code FRU/Action962 1. Check the BIOS Configuration/Setup UtilityProgram (see “Appendix C. Using the BIOSConfiguration/Setup Utility program” onpage 43).2. Parallel Adapter (if installed)3. Logic Unit9XX 1. Printer2. Logic Unit1162 1. Check the BIOS Configuration/Setup UtilityProgram (see “Appendix C. Using the BIOSConfiguration/Setup Utility program” on page43).2. Serial Adapter (if installed)3. Logic Unit11XX 1. Any Serial Device2. Communication/Serial Device Cable3. Logic Unit12XX 1. Async Adapter2. Any Serial Device3. Communication/Serial Device Cable4. Logic Unit1402 Information only1403 Information only14XX Not listed above. Checkprinter before replacing Logic Unit 1. Printer (including configuration)2. Logic Unit18XX 1. Check the BIOS Configuration/Setup UtilityProgram (see “Appendix C. Using the BIOSConfiguration/Setup Utility program” onpage 43). Verify PCI/ISA configuration settings.2. If necessary, set ISA adapters to ″Not Available″ toallow PCI adapters to properly configure.3. Remove any suspect ISA adapters.4. PCI Adapter1962 Boot sequence error 1. Check the BIOS Configuration/Setup UtilityProgram (see “Appendix C. Using the BIOSConfiguration/Setup Utility program” onpage 43).2. Logic Unit24XX 1. Check cable connections.2. Display3. Logic Unit46XX 1. Multiport/2 Adapter2. Multiport/2 Interface Board3. Memory Module28