Safety noticesDANGERElectrical current from power, telephone, and communication cables ishazardous.To avoid a shock hazard:v Do not connect or disconnect any cables or perform installation,maintenance, or reconfiguration of this product during an electrical storm.v Connect all power cords to a properly wired and grounded electricaloutlet.v Connect to properly wired outlets any equipment that will be attached tothis product.v When possible, use one hand only to connect or disconnect signal cables.v Never turn on any equipment when there is evidence of fire, water, orstructural damage.v Disconnect the attached power cords, telecommunications systems,networks, and modems before you open the device covers, unlessinstructed otherwise in the installation and configuration procedures.v Connect and disconnect cables as described in the following table wheninstalling, moving, or opening covers on this product or attached devices.To connect:1. Turn everything OFF.2. First, attach all cables to devices.3. Attach signal cables to connectors.4. Attach power cords to outlet.5. Turn device ON.To disconnect:1. Turn everything OFF.2. First, remove power cords from outlet.3. Remove signal cables from connectors.4. Remove all cables from devices.DANGERLe courant électrique provenant de l’alimentation, du téléphone et des câblesde transmission peut présenter un danger.Pour éviter tout risque de choc électrique :v Ne manipulez aucun câble et n’effectuez aucune opération d’installation,d’entretien ou de reconfiguration de ce produit au cours d’un orage.v Branchez tous les cordons d’alimentation sur un socle de prise de courantcorrectement câblé et mis à la terre.© Copyright IBM Corp. 2002 v