IBM P202 Operating Instructions Manual

Contents

IBM P202 Operating Instructions Manual Manual pdf 10 page image

5Getting StartedGetting StartedFENESCAutomatically Adjusting the Sizeand Centering of the PictureBy pressing the button, the size and centering of thepicture are automatically adjusted to fit the screen.1 Turn on the monitor and computer.2 Press the button.The picture is adjusted to fit the center of the screen.Notes• This function is intended for use with a computer runninggraphic user interface software that provides a full-screenpicture. It may not work properly if the background color isdark or if the input picture does not fill the screen to the edges.• The screen may go blank for a few seconds while performing theauto-sizing function. This is not a malfunction.• Although the signals for picture aspect ratio 5:4 (resolution: 1280× 1024) do not fill the screen to the edges, the picture isaccurately displayed.Selecting the On-screen DisplayLanguageIf you need to change the OSD language, see “Using theLANG (Language) On-screen Display” on page 14.The default setting is English.Selecting the Input SignalThis monitor has two signal input connectors (HD15 and13W3) and can be connected to two computerssimultaneously. Select the input signal you want to view asfollows.1 Turn on the monitor and both computers.2 Press the button.The MENU OSD appears.3 Press the ¨./> and >?// buttons to select “OPTION,” and press the button again.The OPTION OSD appears.4 Press the ¨./> buttons to select “ (INPUT).”MENUEXITCENTERSIZEGEOMCOLORLANGZOOMSCREENOPTIONOK MENUONMANUAL DEGAUSSUNLOCK1 MINOPTIONZZ...1ZZ...INPUT1 MINOPTIONUNLOCK2(continued)