Contents - Table Of Contents
- Table Of Contents
- Table Of Contents
- safety notices
- L, 8284-21A, or 8284-22A
- Installing the PCIe3 x8 SAS RAID internal adapter 6 Gb in the 5148-21L, 5148-22L, 8247-21L, 8247-22L, 8284-21A or 8284-22A
- Preparing the system for operation after installing a PCIe3 x8 SAS RAID internal adapter 6 Gb
- Removing the PCIe3 x8 SAS RAID internal adapter 6 Gb from the 5148-21L, 5148-22L, 8247-21L, 8247-22L 8284-21A, or 8284-22A
- Replacing the PCIe3 x8 SAS RAID internal adapter 6 Gb in the 5148-21L, 5148-22L, 8247-21L, 8247-22L 8284-21A, or 8284-22A
- Preparing the system for operation after removing and replacing the PCIe3 x8 SAS RAID internal adapter 6 Gb
- Common procedures for removing or replacing the PCIe3 x8 SAS RAID internal adapter 6 Gb
- Identifying a part
- Activating an identify LED for an enclosure or server by using the HMC
- Finding the part location code and LED support status
- Identifying a part by using the operating system or VIOS
- Identifying a part in an IBM i system or logical partition
- Identifying a part in a Linux system or logical partition
- Activating the indicator light for a part by using the VIOS tools
- Activating the identify LED by using the ASMI when you do not know the location code
- Starting the system or logical partition
- Starting a system by using the ASMI
- Starting an IBM PowerKVM system
- Stopping a system by using the control panel
- Stopping a system by using the HMC Classic or HMC Enhanced interface
- Removing and replacing covers on the 5148-21L, 5148-22L, 8247-21L, 8247-22L, 8247-42L, 8284-21A, 8284-22A 8286-41A, or 8286-42A system
- Removing the front cover from a rack-mounted 8247-42L, 8286-41A, or 8286-42A system
- Removing the front cover from a stand-alone 8286-41A system
- Removing the side cover from a stand-alone 8286-41A system with an internal RDX docking station
- Installing the front cover
- Installing the front cover on a rack-mounted 8247-42L, 8286-41A, or 8286-42A system
- Installing the front cover and front door on a stand-alone 8286-41A system
- Installing the side cover on a stand-alone 8286-41A system with an internal RDX docking station
- Removing the service access cover from a 5148-21L, 5148-22L, 8247-21L, 8247-22L, 8247-42L, 8284-21A 8284-22A, 8286-41A, or 8286-42A system
- Removing the service access cover from a stand-alone 8286-41A system
- Installing the service access cover on a 5148-21L, 5148-22L, 8247-21L, 8247-22L, 8247-42L, 8284-21A, 8284-22A 8286-41A, or 8286-42A system
- Installing the service access cover on a stand-alone 8286-41A system
- Air baffle
- Closing the air baffle on an 8247-42L, 8286-41A, or 8286-42A system
- Removing the air baffle from an 8247-42L, 8286-41A, or 8286-42A system
- Replacing the air baffle on an 8247-42L, 8286-41A, or 8286-42A system
- Service and operating positions for the 5148-21L, 5148-22L, 8247-21L, 8247-22L, 8247-42L, 8284-21A, 8284-22A 8286-41A, or 8286-42A system
- Placing the rack-mounted system into the operating position
- Connecting the power cords to the system
- Installing or replacing a part with an HMC
- Repairing a part by using the HMC
- Verifying the installed part
- Verifying a replaced part by using the AIX operating system
- Verifying the installed part by using an IBM i system or logical partition
- Verifying an installed part or replaced part on a system or logical partition by using Virtual I/O Server tools
- Verifying the installed part by using the HMC
- Viewing serviceable events by using the HMC
- Verifying the repair in AIX
- Verifying a repair by using an IBM i system or logical partition
- Verifying the repair in Linux
- Verifying the repair from the management console
- Closing a service call
- Closing a service call by using AIX or Linux
- Closing a service call by using IBM PowerKVM
- Closing a service call by using Integrated Virtualization Manager
- Activating and deactivating LEDs
- Deactivating a system attention LED or partition LED by using the management console
- Activating or deactivating an identify LED by using the management console
- Deactivating a system attention LED or logical partition LED by using the Advanced System Management Interface
- Deactivating an identify LED
- Deactivating the indicator light by using the Linux operating system
- Deactivating the identify LED by using the ASMI when you know the location code
- Deactivating LEDs by using the HMC
- Deactivating an identify LED for a FRU by using the HMC
- Notices
- Privacy policy considerations
- Trademarks
- Class B Notices
- Terms and conditions
|
ContentsSafety notices . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . viiPCIe3 x8 SAS RAID internal adapter 6 Gb for the 5148-21L, 5148-22L, 8247-21L,8247-22L, 8284-21A, or 8284-22A . . . . . . . . . . . . . . . . . . . . . . . . . 1Installing the PCIe3 x8 SAS RAID internal adapter 6 Gb in the 5148-21L, 5148-22L, 8247-21L, 8247-22L, 8284-21A, or8284-22A . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1Preparing the system to install a PCIe3 x8 SAS RAID internal adapter 6 Gb . . . . . . . . . . . . . 1Installing the PCIe3 x8 SAS RAID internal adapter 6 Gb in the 5148-21L, 5148-22L, 8247-21L, 8247-22L, 8284-21A,or 8284-22A. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2Preparing the system for operation after installing a PCIe3 x8 SAS RAID internal adapter 6 Gb . . . . . . 8Removing and replacing the PCIe3 x8 SAS RAID internal adapter 6 Gb in the 5148-21L, 5148-22L, 8247-21L,8247-22L, 8284-21A, or 8284-22A . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8Preparing the system to remove and replace the PCIe3 x8 SAS RAID internal adapter 6 Gb . . . . . . . . 8Removing the PCIe3 x8 SAS RAID internal adapter 6 Gb from the 5148-21L, 5148-22L, 8247-21L, 8247-22L,8284-21A, or 8284-22A . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12Replacing the PCIe3 x8 SAS RAID internal adapter 6 Gb in the 5148-21L, 5148-22L, 8247-21L, 8247-22L,8284-21A, or 8284-22A . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14Preparing the system for operation after removing and replacing the PCIe3 x8 SAS RAID internal adapter 6 Gb 17Common procedures for removing or replacing the PCIe3 x8 SAS RAID internaladapter 6 Gb . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19Before you begin . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19Identifying a part . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22Identifying the enclosure or server that contains the part . . . . . . . . . . . . . . . . . . . 22Enabling enclosure or server indicators with the ASMI . . . . . . . . . . . . . . . . . . . 22Control panel LEDs. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22Activating an identify LED for an enclosure or server by using the HMC. . . . . . . . . . . . . 23Finding the part location code and LED support status . . . . . . . . . . . . . . . . . . . . 24Identifying a part by using the operating system or VIOS . . . . . . . . . . . . . . . . . . . 25Identifying a part in an AIX system or logical partition . . . . . . . . . . . . . . . . . . . 25Finding the location code for a part in an AIX system or logical partition. . . . . . . . . . . . 25Activating the indicator light for a part by using AIX diagnostics . . . . . . . . . . . . . . 25Identifying a part in an IBM i system or logical partition . . . . . . . . . . . . . . . . . . 26Finding the location code and activating the indicator light for a part by using the IBM i operatingsystem . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26Identifying a part in a Linux system or logical partition . . . . . . . . . . . . . . . . . . 27Finding the location code of a part in a Linux system or logical partition . . . . . . . . . . . . 27Activating the indicator light for a part by using the Linux operating system . . . . . . . . . . 27Identifying a part in a VIOS system or logical partition . . . . . . . . . . . . . . . . . . . 27Finding the location code of a part in a VIOS system or logical partition . . . . . . . . . . . . 27Activating the indicator light for a part by using the VIOS tools . . . . . . . . . . . . . . . 28Identifying a part by using the ASMI . . . . . . . . . . . . . . . . . . . . . . . . . . 28Activating the identify LED by using the ASMI when you know the location code . . . . . . . . . 28Activating the identify LED by using the ASMI when you do not know the location code . . . . . . . 29Identifying a part by using the HMC . . . . . . . . . . . . . . . . . . . . . . . . . . 29Starting the system or logical partition . . . . . . . . . . . . . . . . . . . . . . . . . . 30Starting a system that is not managed by an HMC . . . . . . . . . . . . . . . . . . . . . 30Starting a system by using the control panel . . . . . . . . . . . . . . . . . . . . . . 30Starting a system by using the ASMI . . . . . . . . . . . . . . . . . . . . . . . . . 32Starting a system or logical partition by using the HMC . . . . . . . . . . . . . . . . . . . 32Starting a system or logical partition by using the HMC Classic or HMC Enhanced interface . . . . . . 32Starting a system or logical partition by using the HMC Enhanced + Tech Preview (Pre-GA) or HMCEnhanced+ interface . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32Starting an IBM PowerKVM system . . . . . . . . . . . . . . . . . . . . . . . . . . 33Stopping a system or logical partition . . . . . . . . . . . . . . . . . . . . . . . . . . 33© Copyright IBM Corp. 2014, 2017 iii PreviousNext |