a. To obtain a list of all guests, type virsh list.b. For each guest in the list, type virsh shutdown domain name or type virsh shutdown domain ID.Note:Type virsh list to verify whether all the guests are powered off. If any guest is not powered off,type virsh destroy domain name or type virsh destroy domain ID to power off the guest.3. Run the ipmitool -I lanplus -H FSP IP -P ipmipassword chassis power off command from a remotesystem.Removing and replacing covers on the 5148-21L, 5148-22L, 8247-21L,8247-22L, 8247-42L, 8284-21A, 8284-22A, 8286-41A, or 8286-42A systemUse these instructions to remove and replace the covers for a 5148-21L, 5148-22L, 8247-21L, 8247-22L,8247-42L, 8284-21A, 8284-22A, 8286-41A, or 8286-42A system so that you can access the hardware parts orperform service.Removing the front coverUse these instructions to remove the front cover from a 5148-21L, 5148-22L, 8247-21L, 8247-22L, 8247-42L,8284-21A, 8284-22A, 8286-41A, or 8286-42A system so that you can access the hardware parts or performservice.Removing the front cover from a rack-mounted 5148-21L, 5148-22L, 8247-21L,8247-22L, 8284-21A, or 8284-22A systemUse this procedure to remove the cover from a rack-mounted system so that you can access thecomponents or perform service.To remove the front cover, complete the following steps:1. Ensure that you have the electrostatic discharge (ESD) wrist strap attached. If not, attach it now.2. Remove the two shipping screws (A) (if present) that secure the system to the rack.Note: Replacing the shipping screws is optional but should be done in geographic areas that areprone to seismic activity.3. Pull the cover away from the system. The cover has an indentation where you can hold onto it moreeasily.36 PCIe3 x8 SAS RAID internal adapter 6 Gb
