Figure 24. Connecting the power cords3. If applicable, close the rack door at the rear of the system.4. Store the drive or drives that you permanently removed in a safe place.5. Start the system. For instructions, see Starting a system (www.ibm.com/support/knowledgecenter/POWER9/p9haj/crustartsys.htm).6. Turn off the identify LED. For instructions, see Deactivating an identify LED (www.ibm.com/support/knowledgecenter/POWER9/p9haj/p9haj_turn_off_identify_led.htm).Disk drives or solid-state drives for the 9040-MR9 system 39

IBM Power System 9040-MR9 Manual

9040-MR9

safety notices

Vital product data card

Removing the vital product data card

Replacing the vital product data card

Preparing the system for operation

Notices

Accessibility features for IBM Power Systems servers

Privacy policy considerations

Class A Notices

Class B Notices

Terms and conditions

System backplane

Removing the system backplane

Replacing the system backplane