v Follow the suggested actions in the order in which they are listed in the Action column until the problemis solved.v See Chapter 4, “Parts listing, System x3100 M4 Type 2582,” on page 151 to determine which componentsare customer replaceable units (CRU) and which components are field replaceable units (FRU).v If an action step is preceded by “(Trained service technician only),” that step must be performed only by atrained service technician.v Go to the IBM support website at http://www.ibm.com/supportportal/ to check for technical information,hints, tips, and new device drivers or to submit a request for information.Error code Description Action3xx0007 Firmware fault detected, system halted. 1. Run the Setup utility, select Load DefaultSettings, and save the settings.2. Recover the server firmware (see “Recovering theserver firmware” on page 142).System-event logThe system-event log contains messages of three types:InformationInformation messages do not require action; they record significantsystem-level events, such as when the server is started.WarningWarning messages do not require immediate action; they indicate possibleproblems, such as when the recommended maximum ambient temperatureis exceeded.Error Error messages might require action; they indicate system errors, such aswhen a fan is not detected.Each message contains date and time information, and it indicates the source ofthe message (POST or the IMM2).Integrated management module II (IMM2) error messagesThe following table describes the IMM2 error messages and suggested actions tocorrect the detected problems.For more information about IMM2, see the Integrated Management Module II User'sGuide at http://www.ibm.com/systems/support/supportsite.wss/docdisplay?lndocid=MIGR-5079770&brandind=5000008.Table 6. IMM2 error messagesv Follow the suggested actions in the order in which they are listed in the Action column until the problemis solved.v If an action step is preceded by “(Trained technician only),” that step must be performed only by a trainedtechnician.Event ID Message Severity Description ActionTemperature and fan messagesChapter 3. Diagnostics 39
