6-4 IBM Personal Computer User GuideEntering SetupWhen the computer is onFollow these steps to enter Setup when the computer is on:1. Save all open files and close all running applications.2. Click on the Start button from your Windows 98 desktop.3. Click on the Shut Down... option.4. From the window that appears, click on the option Restart the computer?,and then click on OK.5. When you see the IBM logo and the line message “Press F1 to enter Setup”,press F1 to enter Setup and display the Configuration/Setup Utility menu.If you have previously set a power-on password, you are prompted to type inthe password after you press the F1 key. See ”Set Password” on page 6-19and ”Halt On” on page 6-15 for information on setting, changing, andremoving the password.When the computer is offFollow these steps to enter Setup when the computer is off:1. Turn on your monitor.2. Turn on the system unit.3. When you see the IBM logo and the line message “Press TAB to show POSTscreen, F1 to enter SETUP”, press F1 to enter Setup and display theConfiguration/Setup Utility menu.If you have previously set a power-on password, you are prompted to type inthe password after you press the F1 key. See ”Set Password” on page 6-19and ”Halt On” on page 6-15 for information on setting, changing, andremoving the password.Note: You cannot enter Setup after the Power On Self Test(POST) is complete.
