BIOS Setup configuration 6-19Automatic Power OnUse this setting to define automated methods of waking up the computer:• wake up when the modem senses an incoming ring• wake up at a future time• wake up when the LAN senses an incoming data packet• wake up when the PCIPME signal is active• wake up when any key in key board is pressedYou can also define the power button override function. You can make the systempower off instantly or after the power button is pressed for four seconds.ACPI suspend TypeThis setting determines the suspend type.Clock Generator ConfigurationThe settings in this function allow you to change the clock rate of CPU, SDRAM,DIMM and PCI bus.Set PasswordIn this option, you can set up a password to restrict access to the Setup Utility or toyour system. You can also change or remove the password.If you set up a password for entering setup, you must type this password each timeyou want to enter the Setup utility. If you do not type the correct password, youcannot enter Setup.If you set up a system password, you must type this password each time you poweron your system.Refer to ”Halt On” on page 6-15 for details on setting a system password and setuppassword.S1(POS) Power on suspend.S3(STR) Suspend to RAM.
