1. Go to http://www.ibm.com/servers/eserver/support/xseries/index.html.2. From the Hardware list, select System x3655 and click Go.3. Click the Download tab.4. Select the system service package for the operating system that is running onthe server in which the Remote Supervisor Adapter II SlimLine is installed.5. Click the file link to download the system service package to d:\ibmssp, where dis the hard disk drive letter. (Create the directory if necessary.)6. Extract the files into d:\ibmssp. See the readme.txt file, which is included withthe extracted files, for a list of the files in the package.7. Follow the instructions in Remote Supervisor Adapter II Installation Instructions,which is in Portable Document Format (PDF) in d:\ibmssp, to install the softwareand firmware.8. Restart the server after the software and firmware are installed.Completing the setupSee the IBM Remote Supervisor Adapter II User’s Guide on the IBM System xDocumentation CD for instructions for completing the configuration, including thefollowing procedures:v Configuring the Ethernet portsv Defining login IDs and passwordsv Selecting the events that will receive alert notificationsv Monitoring remote server status using the Remote Supervisor Adapter II SlimLineWeb-based interfacev Controlling the server remotelyv Attaching a remote diskette drive, CD drive, or disk image to the serverAfter you configure the adapter, use the Web-based interface to create a backupcopy of the configuration so that you can restore the configuration, if you have toreplace the adapter. For more information, see the Remote Supervisor Adapter IIUser’s Guide.Chapter 3. Configuring the server 91
