1004.10.3.4 Alarm OutputHere is for you to set proper alarm output such as schedule, manual.Please highlight icon to select the corresponding alarm output.After all the setups please click OK button, system goes back to the previous menu. SeeFigure 4-98.Figure 4-984.10.4 Storage4.10.4.1 Schedule4.10.4.1.1 RecordNote:You need to have proper rights to implement the following operations. Please makesure the HDDs have been properly installed.After the system booted up, it is in default 24-hour regular mode. You can set record typeand time in schedule interface.In the main menu, from Setting->Storage->Schedule, you can go to schedule menu.See Figure 4-102.Please note you need to go to main menu->Setting->System->General->Holiday toset holiday date first, otherwise, there is no holiday setup item. Channel: Please select the channel number first. You can select “all” if you want toset for the whole channels. : Sync connection icon. Select icon of several dates, all checked itemscan be edited together. Now the icon is shown as .
