HD AVS Standalone DVR User’s Manual193 Installation and ConnectionsNote: All the installation and operations here should conform to your local electricsafety rules.3.1 Check Unpacked DVRWhen you receive the DVR from the forwarding agent, please check whether there is anyvisible damage. The protective materials used for the package of the DVR can protectmost accidental clashes during transportation. Then you can open the box to check theaccessories.Please check the items in accordance with the list. Finally you can remove the protectivefilm of the DVR.NoteRemote control is not a standard accessory and it is not included in the accessory bag.3.2 About Front Panel and Rear PanelThe model in the front panel is very important; please check according to your purchaseorder.The label in the rear panel is very important too. Usually we need you to represent theserial number when we provide the service after sales.3.2.1 HDD InstallationThis series DVR has 1 to 8 HDDs (no limitation for capacity). Please use HDD of 7200rpmor higher. Usually we do not recommend the HDD for the PC. You can refer to theAppendix for recommended HDD brand.All figures listed here for reference only.Please follow the instructions listed below to install hard disk.This series DVR max supports 8 SATA HDDs. Please use HDD of 7200rpm or higher.2. Remove the HDD upper bracket 3. Now you can see the bottom bracket5. Use screws to fix HDD. 6. Install the upper bracket and then Usescrews to fix HDD in the bracket.1. Loosen the screws of theupper cover.4. Line up the HDD to the fourholes of the HDD bracket.