ICP DAS USA I-7088 User Manual

Also see for I-7088: User manual

Contents

ICP DAS USA I-7088 User Manual Manual pdf 101 page image

I-7088 and M-7088 User Manual, Rev: A1.2 7MH-026-A12 1012.40. @AADODDDescription:This command is used to set the status of the PWM output port.Syntax:@AADODD[CHKSUM](CR)@ Delimiter characterAA The address of the module to be set (00 to FF)DO The command to set the status of the PWM output portDD A two-digit hexadecimal value, where bit 0 correspondsto PWM channel 0, and bit 1 corresponds to PWMchannel 1, etc. When the bit is 0, it denotes that thePWM output port is off, and 1 denotes that the PWMoutput port is on.Response:Valid Command: !AA[CHKSUM](CR)InValid Command: ?AA[CHKSUM](CR)! Delimiter character for a valid command? Delimiter character for an invalid commandAA The address of the responding module (00 to FF)There will be no response if the command syntax is incorrect, thereis a communication error, or there is no module with the specifiedaddress.