ICP ZT-2550 Quick Start Manual
Also see for ZT-2550: User manual
              | |
b. Addressable Mode is an advanced application mode and it is used to senddata to specific ZigBee nodes. It is not only used to transmit data to specificZigBee slaves from host but also transmit data between ZigBee slaves. A5-byte ASCII code should be added as an index before the data.Module Frame Type NoteZT-2550ZT-2551 Unicast Data will be sent to a specific ZigBee slave.Format: “:AAAA” + Data[Eg1] When ZT-2550 ZigBee Host sends “:0001DATA_01” via unicast frame,→Only the ZigBee Slave 0x0001 receives DATA_01.(Note: Unicast type frame, data will be only sent to the specific ZigBee node)[Eg2] When ZigBee slave 0x0001 sends “:0002DATA_02” via unicast frame,→Only the ZigBee Slave 0x0002 receives DATA_02.(Note: Unicast type frame, data will be only sent to the specific ZigBee node)ICP DAS, ZT‐2550/ZT‐2551 Quick Start Guide, Version 1.2 Page 7※ There is an “Advanced Settings” for some specific user, please refer the user manualsection 7.3 ”Non-addressable Device Communication” for more information.ZC_0000ZS_0001 DATA_02ZS_0002DATA_01：0001DATA_01DATA_03AddressableTransparentAddressable：0002DATA_02DATA_03DATA_04DATA_04 |
manualsdatabase
Your AI-powered manual search engine